Partlist according to www.buerklin.de all prices in DM parts for the interface board : qty | value | order no. | price | ----+-----------------------+------------+-------+ 8 | 1 kOhm / 1/4 W | 30 E 292 | -,56 | 2 | 10 Ohm / 4 W | 29 E 600 | 1,06 | 4 | 10 nF | 55 D 558 | 2,20 | 1 | 4.700 µF / 35 V 22 mm | 13 D 124 | 4,79 | 1 | 2.200 µF / 35 V 20 mm | 13 D 120 | 3,16 | 1 | rectifier C5000/3300 | 55 A 900 | 2,80 | 1 | 78S05 | 50 S 1430 | 1,45 | 1 | 78S12 | 50 S 1433 | 1,47 | 1 | 74LS08N | 43 S 3150 | -,84 | 1 | RJ 11 4p/4c | 73 F 660 | 1,15 | *(RJ 11 6p/4c | 73 F 662 | 1,23*) 1 | db 25 male / 90 degree| 52 F 3105 | 6,25 | 1 | 16-pole ic socket | 14 B 410 | -,21 | 1 | 14-pole ic socket | 14 B 510 | 1,28 | 1 | 2x8 pole pinhead, | 59 F 3426 | 1,35 | | 90 degree | | | 2 | heatsinks, | 70 B 677 | 4,68 | | SK104 50mm long | | | ----+-----------------------+------------+-------+ 1 | euro board photo | 12 H 124 | 3,94 | ----+-----------------------+------------+-------+ TOTAL 37,19 incl. 16% MwSt 43,14 ================================================== parts for one ad board : qty | value | order no. | price | ----+-----------------------+------------+-------+ 1 | TLC 1543 CN from | NOT AVAIL | | | TEXAS INSTRUMENTS | FROM HERE | | 1 | 74LS08 | 43 S 3150 | -,84 | 1 | 74LS05 | 43 S 3100 | -,84 | 12 | 1 kOhm / 1/4 W | 30 E 292 | -,84 | 2 | 100 Ohm resistors | 30 E 196 | -,14 | 1 | 20-pole ic socket | 14 B 515 | 1,57 | 1 | 16-pole ic socket | 14 B 410 | -,21 | 2 | 14-pole ic sockets | 14 B 510 | 2,56 | 1 | 2x8 pinhead | 56 F 6770 | 1,13 | 1 | 2x8 pinhead, | 59 F 3426 | 1,35 | | 90 degrees | | | 11 | RJ 11 4p/4c | 73 F 660 | 12,65 | *(RJ 11 6p/4c | 73 F 662 | 13,53*) ----+-----------------------+------------+-------+ 1 | euro board photo | 12 H 124 | 3,94 | ----+-----------------------+------------+-------+ TOTAL 26,07 incl. 16% MwSt 30,24 ================================================== parts for board-interconnection =============================== (as needed) DIL Cable connector 53 F 3305 3,02 ribbon cable connector 56 F 6198 1,41 get an old flat ribbon cable from a computer or similar. take 16 poles and cut them from the rest of the cable. use this for crimping with the connectors. or buy some new... the IC is not available from buerklin, so you have to look where to get. try to get th CN version in a pdip-20 casing, otherwise you have to solder a small adapter for the so-outlined version. and for this you need a soldering needle or a very fine tip for your iron.