multio.mamalala.de - USB multI/O

The "magic glue"

In the .tgz file below you will find the complete source of the firmware, together with a pre-compiled .hex file and the compilers supplementary output files.
The Firmware is written with the cc5x compiler together with mplab.

ATTENTION: the firmware revision has to match the board's revision.

*Link*	*Description*	*Updated*
multio-firmware-0.4.tgz	The latest version for the new pcb's 171.784 Bytes	31. May '05
multio-firmware-0.3a.tgz	buggy, as all previous ones 169.797 Bytes	31. May '05
multio-firmware-0.3.tgz	older version 167.933 Bytes	31. May '05
multio-firmware-0.2.tgz	The first usable version..... 158.985 Bytes	28. February '05
Documentation	Informations on the Firmware	28. February '05
multio-test.c	Very basic example on how to read the box with libusb Compile with "gcc multio-test.c -lusb" and run a.out to see the output of the box 3.187 Bytes	28. February '05

!!! ATTENTION !!!
You should be experienced in electronics if you whish to build this circuit !!
If you are not able to make your own pcb's and soldering them, ask a friend who knows how to do !

mamalala.de